Septic System Diagnostics

If you live in a particular house long enough, you are bound to find yourself dealing with blocked drains at some point. These are certainly no fun to deal with – especially when someone in the house has to go and there are no toilets that currently work. Fortunately, most local plumbing services are well-represented online, which means that you don’t have to do much digging around to find a professional ready to come to the rescue.

If your toilet is refusing to flush properly, and you would like to run a few diagnostics of your own before calling out the pros, here are some tips to get you started:

1. Find out if your septic system is damaged or clogged.

The first thing that you need to do is diagnose the actual system. This can be big – not to mention dirty – job, and it usually requires professional equipment and know how. With that in mind, even if you are planning to implement a DIY solution, it is probably still a good idea for you to call out a professional for the initial diagnostic. While many blocked drains are simply caused by blockages or accumulations in septic tanks, some are the result of mechanical problems. The latter require serious professional attention.

2. If the tank is in working order, then look between the house and the septic system.

The next line of problem areas occur between the outflow of the house’s plumbing and the intake of the septic system. A good indicator that this is where your problem lies is that your sinks drain while your toilet does not flush. In this case, fixing the problem could be as easy as running a pluming snake through the pipes. Some hardware stores can make this available to you on a rental basis. However, if you are not having any luck with the operation – which often ends up being the case in these sorts of plumbing emergencies – then you are much better off calling out the professionals.

3. Look to the intake of the septic tank.

The majority of blockages that occur with a septic tank – or at least those that cause major problems – take place between the inlet pipe and the inlet deflector of the septic tank. This is actually one of the easier problems to fix, though many homeowners are not sure about how to actually go about correcting it. Likewise, few relish the idea of getting this up-close-and-personal with their septic systems. In this case, simply lift the cover to the tank, shovel the blockage away and the entire system should begin draining properly again. If that doesn’t work, septic tank pumping atlanta can get you going again by taking out whatever blockage exists.

Conclusion

The above are three of the biggest culprits for septic-related blocked drains anywhere. However, there are other potential problems as well. For example, some septic tank outflows have filters that need to be cleaned once or twice per year. This is why it’s never a bad idea to call out a professional plumbing and septic maintenance service to take a closer look at your system.

0 comments

Leave a Reply

Your email address will not be published. Required fields are marked *